3 saving scans in boxes, Saving scans in boxes -10, Using a box destination -10 – Konica Minolta bizhub 360 User Manual
Page 33
2
Saving Documents
2-10
bizhub 360
Sa
ving
D
o
c
u
m
e
nt
s
Chapter 2
2.3
Saving Scans in Boxes
Scanned images can be saved in boxes. Box destinations can be registered
in the address book, or a box destination can be specified directly.
The following procedure describes how to specify a box as a destination and
how to use the Direct Input tab.
Using a Box Destination
A destination where a box has been registered is called a “box destination”.
Box destinations are saved on the Address Book tab and are indicated by
“B” on their buttons.
The following procedure describes how to save data to a specified box des-
tination that has already been registered.
2
Note
If a box destination is used, the document is automatically saved with the
default name.
To specify whether or not the marks indicating the destination type are
displayed, touch [2 User Setting] in the Utility screen, then [2 Display Set-
ting], then [2 Scan Basic Screen Default Setting], and then specify a set-
ting for the “Address Type Symbol Display” parameter. For details, refer
to User’s Guide [Copy Operations].
2
Note
E-mail destinations are indicated by “E”, FTP destinations are indicated
by “F”, and SMB destinations are indicated by “S”.