Konica Minolta magicolor 1680MF - Manual (Page 95)

Replacing Consumables 7-10
16
Press the Stop/Reset key to reset the machine.
"
The machine must complete a calibration cycle after a toner car-
tridge has been replaced. If you open the scanner unit or front
cover before the machine is reset, the calibration stops, then starts
over again after the cover is closed.
Removing All Toner Cartridges
Note
Be careful not to spill toner while removing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
By selecting the EJECT MODE in the PRINTER MODE menu, all toner car-
tridges can be removed.
Follow the procedure described below to use the EJECT MODE.
1
With the main screen displayed, press the * key to display the PRINTER
MODE screen.
2
Press the , key to select T/C CHANGE and then press the Select key.
3
Press the , key to select EJECT MODE and then press the Select key.
4
Open the front cover.
"
Before opening the front
cover, open Tray 1 if it is
not already open.