Konica Minolta magicolor 1680MF - Manual (Page 44)

Print Media 3-3
Types
Before purchasing a large quantity of special media, do a trial print with the
same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to
load it. For a list of approved media, refer to http://printer.konicaminolta.com.
Plain Paper (Recycled Paper)
Use plain paper that is
„
Suitable for plain paper printers and copiers, such as standard or recycled
office paper.
Note
Do not use the media types listed below. These could cause poor print
quality, media misfeeds, or damage to the machine.
DO NOT use media that is
„
Coated with a processed surface (such as carbon paper and colored
paper that has been treated)
„ Carbon backed
„ Unapproved iron-on transfer media (such as heat-sensitive paper,
heat-pressure paper, and heat-press transfer paper)
„ Cold-water-transfer paper
„ Pressure sensitive
„ Designed specifically for inkjet printers (such as superfine paper, glossy
film, and postcards)
„ Already been printed on by another printer, copier, or fax machine
„ Dusty
„ Wet (or damp)
"
Keep media between 15% and 85% relative humidity. Toner does
not adhere well to moist or wet media.
Capacity Tray 1 Up to 200 sheets, depending on the media
weight
Orientation Tray 1 Face up
Driver
Media Type Plain Paper (Recycled)
Weight 60 to 90 g/m² (16 to 24 lb bond)