Konica Minolta bizhub 200 - Manual (Page 31)

2 Installing the printer driver
2-10 200/250/350
10
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
For Windows Vista
1
After using a parallel cable or a USB cable to connect this machine to
a computer, turn the main power of this machine on.
– Do not disconnect or connect the cable while the computer is start-
ing up.
2
Start the computer.
The Found New Hardware Wizard dialog box appears.
– If the Found New Hardware Wizard dialog box does not appear,
turn off this machine, then on again.
– When turning off the power, then on again, wait at least 10 seconds
before turning it on again. Otherwise, this machine may not function
properly.
3
Click “Locate and install the driver software (recommended)”.
The dialog box prompting you to insert the disk appears.
– If the disk is not available, click “I don't have the disk. Show me oth-
er options”. In the next window, select “Browse my computer for
driver software (advanced)”, and then specify the desired printer
driver folder.
Konica Minolta PCL driver (VXL): “Driver_Vista\Drivers\PCLXL\Lan-
guage folder\Win_x86 (for a 64-bit operating system, “Win_x64”)”
folder on the User Software CD-ROM
Konica Minolta PostScript driver (VPS): “Driver_Vista\Driv-
ers\PS\Language folder\Win_x86 (for a 64-bit operating system,
“Win_x64”)” folder on the PostScript Printer Driver CD-ROM
4
Insert the Windows Vista printer driver CD-ROM into the computer's
CD-ROM drive.
– Konica Minolta PCL driver (VXL): User Software CD-ROM
– Konica Minolta PostScript driver (VPS): PostScript Printer Driver
CD-ROM
The information on the disk is retrieved. A list of software supporting
this machine appears.
5
Specify the name of the desired printer driver, and then click the [Next]
button.