Konica Minolta magicolor 1650EN - Manual (Page 56)

Configuration Menu Overview 4-17
INTERFACE MENU
With this menu, interface settings can be specified.
The printer must be rebooted after any setting in the ETHERNET menu (for
example, the TCP/IP address) is changed.
Therefore, the following message appears when the configuration menu is
exited (the + key is repeatedly pressed) after a setting has been changed.
Select YES, and then press the Menu Select key to reboot the printer.
Otherwise, turn off the printer, and then turn the printer on again after a few
seconds.
ETHERNET *
INTERFACE MENU
TCP/IP ENABLE
IPV4 DHCP/BOOTP
IPV4 ADDRESS
DEFAULT ROUTER
SUBNET MASK
ENABLE AUTO IP
ENABLE IPV6
IDENTIFIER ENABLE HTTP IP SERVICES