Konica Minolta magicolor 1650EN - Manual (Page 172)

Status, Error, and Service Messages 8-35
PUT
"SIZE"
"TYPE"
IN TRAY 1
The size of paper being
printed on is different from the
size of paper specified in the
printer driver. Load the correct paper on
Tray1, and press the Menu
Select key, then specify the
size and type of the paper.
PUT
“SIZE”
“TYPE”
IN TRAY 2
The paper size set from the
printer driver is different from
the size of paper loaded into
Tray 2. „ Open Tray 2 and keep
correct paper size. Then
close Tray 2.
„ Specify the correct paper
size in the
MAIN MENU/
PAPER MENU/INPUT
TRAY/TRAY2/MEDIA
SIZE menu.
TOP COVER
OPEN
The printer’s top cover is
open. Close the top cover.
The imaging cartridge is not
installed. Install the imaging cartridge.
A imaging cartridge incompati-
ble with the machine is
installed. Replace the imaging car-
tridge with a correct one.
X TONER
LIFE END
The X toner cartridge has
reached the end of its life. Replace the toner cartridge.
"
If the MAIN MENU/
QUALITY MENU/
TONER OUT
ACTION
menu is set
to CONTINUE .
X TONER
MISSING
The X toner cartridge is not
installed. Install a X toner cartridge.
X TONER
OUT
REPLACE
XXXX
(Ready Indica-
tor: Off. Error
Indicator: On)
The X toner cartridge is empty.
(If the MAIN MENU/
QUALITY MENU/TONER OUT
ACTION
menu is set to STOP.)
Replace the toner cartridge.
"
If the MAIN MENU/
QUALITY MENU/
TONER OUT
ACTION
menu is set
to CONTINUE ,
printing can continue.
However, the printing
results are not
guaranteed.
This
message... means... do this...