Konica Minolta magicolor 1650EN - Manual (Page 53)

Configuration Menu Overview 4-14
"
All factory default values are shown in bold.
REPLACE
TONER
BLACK
Settings
YES /NO
If YES is selected, the carousel rotates to the black
toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 6-5.
CYAN
Settings
YES /NO
If YES is selected, the carousel rotates to the cyan
toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 6-5.
MAGENTA
Settings
YES /NO
If YES is selected, the carousel rotates to the
magenta toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 6-5.
YELLOW
Settings
YES /NO
If YES is selected, the carousel rotates to the yellow
toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 6-5.
REMOVE
ALL
Settings
YES/NO
If YES is selected, the printer enters REMOVE ALL
mode.
This mode is used when removing all toner car-
tridges.
For details on removing all toner cartridges, refer to
“Removing All Toner Cartridges” on page 6-12.
TONER
OUT
ACTION
Settings
STOP /CONTINUE
If STOP is selected, printing stops when the toner cartridge is
empty.
If CONTINUE is selected, printing continues even if the toner
cartridge is empty. However, the printing result are not
guaranteed. If printing is continued, the message "X TONER
LIFE END" appears and printing stops.