Konica Minolta bizhub 601 - Manual (Page 70)

751/601 3-8
Using fax/scan functions 3
2
Select the desired destination.
– The last five destinations where a transmission was sent are displayed.
– To cancel a selection, touch the button for a selected destination again.
3.2.3 Selecting a destination with an LDAP search
Follow the procedure described below to search in the LDAP server and select
the destination.
!
Detail
In order to perform an LDAP search, LDAP must be enabled and an LDAP server
must be registered. For details on specifying LDAP settings, refer to the User’s
Guide [Network Administrator].
If user authentication is applied, whether or not to accept "Manual Destination
Input" is specified for each registered user. For details on the user registration,
refer to the User's Guide [Copy Operations].
1
Touch the Address Search tab.