Konica Minolta bizhub 601 - Manual (Page 53)

751/601 2-26
Using copy functions 2
2.10 Selecting the Paper settings
2.10.1 Selecting a Paper Type setting for the bypass tray
If paper other than plain paper, such as OHP transparencies or label sheets, is
loaded in the bypass tray, be sure to change the paper type setting as
described below.
2
Note
A paper type for the other trays than the bypass tray can be selected in the User
setting. For details, refer to the User’s Guide [Copy Operations].
2
Reminder
If special paper is loaded into the bypass tray, be sure to select the corresponding
paper type, otherwise a paper misfeed may occur.
1
In the Basic screen, touch [Paper].
The Paper screen appears.