Konica Minolta PageScope Log Management Utility - Manual (Page 62)

Log Management Utility Settings 5
Log Management Utility 5-13
– Click Specify as reception target to set the device as a target for
reception processing. If this is deselected, then logs cannot be ac-
quired using
Receive From Specified Devices or Periodic Re-
ception .
6
Click OK .
The Device detail settings dialog box will close.
7
Click OK .
The Edit the device registration information dialog box will be
closed, and the settings enabled.
5.5.2 Protect Functions
Select Protect Function from the Setup menu in order to specify that input
of a password is required when starting Log Management Utility, or when a
specified period has elapsed without any operation being carried out.
Ensure that the protect function is used as necessary in order that users oth-
er than administrators can not operate the Log Management Utility.
2
Note
Protect Functions cannot be configured to be enabled at the same time
as the Receive Log Periodically function.