Konica Minolta PageScope Log Management Utility - Manual (Page 61)

Log Management Utility Settings 5
Log Management Utility 5-12
3
Change configured information.
– In Registered name , change the registered device name. A maxi-
mum of 64 byte characters can be input.
– Select Save the administrator password and input a password in
order to save an administrator password for the device.
– Device address cannot be changed.
4
Click Detail .
The Device detail settings dialog box will be displayed.
5
Change configuration information.
– In Action when HDD is full , specify the action for saving logs when
there is no space remaining on the device hard disk. To overwrite
logs on the device, select
Overwrite the HDD ; and to stop the de-
vice, select Stop the device . This can only be specified if a hard
disk is installed on the device.
– In TCP socket settings , change the port number to be used with
the TCP Socket interface. Ensure this is configured in accordance
with device settings. Settings are only required when changing TCP
Socket settings on the device. Click
Reset to restore original set-
tings.