Konica Minolta bizhub PRO 950 - Manual (Page 14)

3 User Authentication in Security Functions
6 bizhub PRO 950
3 User Authentication in Security Func-
tions
3.1 Description of user authentication
In Security Functions, setting up password conditions will be tougher
to im-
prove security. The administrator should set up a user name and
password
required for user authentication, as this is an administrator
operation.
User Name: 1 to 64 alphanumerical characters
Password: 8 to 64 alphanumerical characters (case sensitive)
If a wrong password is entered, attempts to re-try cannot be made
for five
seconds.
2
Reminder
Do not use your name, birthday, employee number, etc. for a password
that others can easily figure out.
If a password set in normal mode is fewer than 8 characters or more than 64
characters, you cannot use it in Security Strengthen mode.
If this happens, contact the administrator to turn OFF Security Functions,
and set a new password following the above conditions.
Even after a successful access has been made, authentication with user
name and password will be required under the following conditions.
- The main power switch is turned off.
- The sub power switch is turned off.
- The [Access] key on the control panel is pressed.
- The [Copy]/[Scan]/[Box] key on the control panel is pressed, when the
User/Account Authentication Connect is turned on.
- The [Job List] key on the touch panel is touched, when the User/Account
Authentication Connect is turned on.
- The auto reset function operates.