Konica Minolta bizhub 160 - Manual (Page 28)

Common settings 6
TWAIN Driver 6-5
Sharp
This function is used to sharpen the image or blur it for effect.
Curves
This function is used to set the gamma of the image.
This function will allow you to brighten or darken the overview of the image
without changing the original resolution.
There are three input controls available:
-
The scroll bar
- The editing field
- Directly dragging the points of the folded or curved lines
Level
This function is used to set the gamma value, increase shadow and highlight
areas, enhance shadow values and reduce highlight values.
Color balance
This function is used to fine-tune the RGB values in shadows, midtones, and
highlights areas.
There are three setting options:
-
Cyan-Red
- Magenta-Green
- Yellow-Blue
Hue/Saturation
This function is used to set hue and saturation as well as the lightness of the
image.
Hue can be set within the range -180 to 180.
Saturation can be used to adjust the freshness of colors by setting the range
from -100 to 100.
Lightness can be set from -100 to 100.
7 Color balance -100 to 100
For details, refer to “Color balance” on page 6-5.
8 Hue/Saturation Hue: -180 to 180
Saturation: -100 to 100
Lightness: -100 to 100
For details, refer to “Hue/Saturation” on page 6-5.
No. Items Settings