Konica Minolta bizhub 160 - Manual (Page 14)

Connecting to the machine 3
TWAIN Driver 3-1
3 Connecting to the machine
Connecting to the USB port of the machine
7 7 7 7 CAUTION
Use of an unshielded cable may result in radio interference.
%
Be sure to use a shielded USB cable.
1
Make sure that the machine and the computer to be connected to the
machine are turned OFF.
2
Connect one end of the USB cable to the USB port of the machine.
This completes the connection.
2
Note
USB1.1 is only supported on Windows 98 SE, Windows Me, Windows
2000, Windows XP, and Windows Server 2003.
Connect
Machine PC