3 installation under windows me/98 se, Installing the twain driver under windows me/98 se, Installation under windows me/98 se -5 – Konica Minolta bizhub 160 User Manual
Page 20
Installing the TWAIN driver
4
TWAIN Driver
4-5
4.3
Installation under Windows Me/98 SE
2
Note
When using Windows 98 SE, the USB-compatible device driver must be
installed before the TWAIN driver is installed. Click [Next] after selecting
the following in the dialog box that appears, and then click [CD-ROM
drive].
Display a list of all the drivers in a specific location, so you can select
the driver you want.
Click [Finish] to begin installing the TWAIN driver.
Installing the TWAIN driver under Windows Me/98 SE
1
With Windows running, insert the CD-ROM into your computer’s CD-
ROM drive.
2
Turn on the machine.
3
When the machine is ready, connect it to the computer with the USB
cable.
The “Add New Hardware Wizard” dialog box appears and installation
of the TWAIN driver begins.
4
With Windows Me, select
Specify the location of the driver (Ad-
vanced)
.
With Windows 98 SE, click [Next], and then select
Search for the best
driver for your device. (Recommended)
in the dialog box that ap-
pears.
5
Click [Next].
6
Select
Specify a location
, and then click [Browse…].
7
Browse to “Driver\(language)\Win9x” on the CD-ROM, and then click
[OK].
Select the language you prefer. For example, if you prefer English,
browse to: Driver\English\Win9x
8
Click [Next], and then follow the instructions that appear on the screen
until you can click [Finish].