20 report settings, 20 report settings -59, Utility mode chapter 10 – Konica Minolta bizhub 750 User Manual
Page 240: Utility mode, Network fax 10-59, You may select the report settings to be on or off, Detail, Indicates factory default setting
Utility Mode
10
Network Fax
10-59
Utility Mode
Chapter 10
10.20 Report Settings
You may select the Report Settings to be On or Off.
!
Detail
For other items of Report Setting, see "User’s Guide (Facsimile
Operations)".
*
indicates factory default setting.
Item
Description
Available value
Activity Report
Determines whether to print the report
and the timing at which the report will be
printed out.
OFF / Daily / Every 100
Comm.
*
/ 100/Daily
When you set the output
of Activity Report to [Dai-
ly] or [100/Daily], you can
also set the time to out-
put the report.
TX Report
ON / If TX Fails
*
/ OFF
Sequential TX
Report
ON
*
/ OFF
Broadcast Re-
sult Report
Set up the Broadcast Result Report print-
ing method.
All Dest.
*
/ 1 Dest. at a
time
TX Result Re-
port Check
Determines whether to display the trans-
mission result report select screen. If you
select “ON”, it will be displayed after
each transmission.
OFF
*
/ ON
Network Fax
RX Error Report
Determines whether to print the Network
Fax RX Error Report.
ON
*
/ OFF
MDN Message
Sets whether to print the MDN message
automatically.
Do not Print/Print
*
DSN Message
Sets whether to print the received DSN
message automatically.
Do not Print
*
Receipt Mail
Text
Sets whether to print the body of the mail
subjected to an error automatically.
Do not Print/Print
*