Konica Minolta bizhub 750 - Manual (Page 193)

10 Utility Mode
10-12 Network Fax
Utility Mode
Chapter 10
10.2.15Administrator Setting >> Fax Setting >> TX/RX Setting
Sets the print method at the transmission/reception mode. (page 10-51)
*1
: The displays are different depending on the country.
*2
: To make the setting of [Print Paper Size] enable, set [Tray Selection for
RX Print] to [Auto].
*3
: Tray type may be different depending on the installed option.
*4
: When [Min. Reduction for RX Print] is set to [x1.0], [Print Paper
Selection] and [Tray Selection for RX Print] are set to [Auto]. [Print
Separate Fax Pages] is turned to [OFF].
Item Description Available value
Duplex Print
(RX) When set to ON, the original received is
printed on both sides of the paper. OFF
*
/ ON
Inch Paper Pri-
ority Over A4
*1
By setting this function ON, inch series
form of paper is preferentially selected for
the received original. OFF
*
/ ON
Print Paper Se-
lection When the priority of each size is set:
A record is made in the priority size.
When no priority size is set, a record is
made in the nearest size.
When the fixing of each size is set:
A record is made only in the size set. Auto Select
*
/ Fixed Size
/ Priority Size
Print Paper
Size
*1 *2
Set the paper size on which the docu-
ment received is printed.
The default varies according to the set-
ting of [Inch Paper Priority Over A4]. A3 / B4 / A4* / 8
1
/
2
Ч 11 /
8
1
/
2
Ч 14 / 11 Ч 17
Tray Selection
for RX Print
*3
Determines the paper tray if you want to
fix the paper tray for received document. Auto
*
/ Tray 1 / Tray 2 /
Tray 3 / Tray 4
Min. Reduction
for RX Print
*4
Set the output magnification of the origi-
nal received. 87-96 * / × 1.0
Print Separate
Fax Pages Determines the default of transmission
mode. OFF
*
/ ON
No. of Sets (RX) Set the number of prints for the received
document. 1
*
-10