Konica Minolta bizhub 750 - Manual (Page 187)

10 Utility Mode
10-6 Network Fax
Utility Mode
Chapter 10
10.2.3 User Setting >> Initial Setting
Set the default of the Fax function. (page 10-21)
10.2.4 Administrator Setting >> System Setting >> Power Save
Setting>> Entering Power Save Mode (Fax)
Set the Entering Power Save Mode (Fax). (page 10-23)
10.2.5 Administrator Setting >> System Setting >> Restrict User
Access>> Restrict Operation Setting >> Restrict Fax
Broadcasting
Transmitting the fax to multiple destinations is prohibited. (page 10-25)
10.2.6 Administrator Setting >> Administrator/Machine Setting
>> Administrator Registration
Enter the E-mail address of the administrator. This is used as a From address
of the IP address fax. (page 10-27)
Item Description Available value
Fax [Current Setting]:
Before entering the Utility Mode, each of
the items that have been set on the touch
panel is registered as the default of fax
function.
[Factory Default]:
Values set when shipped from the factory
are registered as the default of fax func-
tion. Current Setting / Factory
Default
*
Item Description Available value
Entering Power
Save Mode
(Fax) If the [Immediately] have been selected
and it is power save mode when input
signals come, then power save mode will
be resumed after completion of recep-
tion. Normal
*
/ Immediately
Item Description Available value
Restrict Fax
Broadcasting Transmitting the fax to multiple destina-
tions is prohibited. ON/ OFF
*
Item Description Available value
Administrator
Registration Register the administrator of copier. Name / E-Mail Address