Konica Minolta BIZHUB C360 - Manual (Page 30)

bizhub C360/C280/C220 3-7
3.2 [Basic] 3
Reference
- You can select User Paper when weighing capacity is specified by your service representative. For de-
tails on the user paper, refer to the [User's Guide Copy Operations].
3.2.3 [Zoom]
Image size in the original can be enlarged or reduced.
0 The auto zoom setting and the auto paper setting cannot both be selected at the same time.
0 The zoom ratio setting can be changed by the administrator settings.
0 If the auto zoom setting is selected and an enlargement is to be copied on paper larger than the original,
load the original with the same orientation as the paper.
%
Press [Basic] ö [Zoom].
[User Paper 3] [User Paper 4] [User Paper 5] [Duplex 2nd
Side]
[Plain Paper]
[Duplex 2nd
Side]
[Thick 1]
[Duplex 2nd
Side]
[Thick 2]
[Duplex 2nd
Side]
[Thick 3]
[Duplex 2nd
Side]
[Thick 4]
[Duplex 2nd
Side]
[User Paper 1]
[Duplex 2nd
Side]
[User Paper 2]
[Duplex 2nd
Side]
[User Paper 3]
[Duplex 2nd
Side]
[User Paper 4]
[Duplex 2nd
Side]
[User Paper 5]
Settings
[Auto Zoom] The most appropriate zoom ratio is automatically selected based on the
size of the loaded original and the specified paper size.
[Full Size] A copy that is the same size as the original (100%) is produced.
[Enlarge] Select the desired zoom ratio from the preset enlargement ratios to pro-
duce an enlarged copy.
[Reduce] Select the desired zoom ratio from the preset reduction ratios to produce
a reduced copy.