Konica Minolta Biznub Series - Manual (Page 8)

Software Installation 2
Device Set-Up 2-1
2 Software Installation
2.1 OpenAPI settings
Some plug-in applications use OpenAPI. On an occasion like this, it is nec-
essary to make a write setting in advance on the device side.
Installation procedure
Before installing the Device Set-Up, specify the OpenAPI settings on the de-
vice.
% Specify the OpenAPI Login Name and password from the control panel
of the device as necessary.
–
For details on the procedure for specifying the OpenAPI settings
from the control panel of the device, refer to the device’s User’s
Guide.
2
Note
Follow the instructions in the User’s Guide for the device to specify the
settings for SSL transmission.