Konica Minolta Biznub Series - Manual (Page 60)

Other Functions 5
Device Set-Up 5-24
– When NTLM is selected
– Directory name: Input a name for the current details.
– LDAP server address:
Input the IP address or DNS name of the directory server. If using
SSL, input the DNS name.
– Search Base:
Input the search base. (Up to 512 characters)
(E.g.) ou=sales division, dc=ABCDEFG, dc=com
Consult with the LDAP administrator about search bases to input.
– Port Number:
Specify the port number to be used when accessing LDAP servers.
– SSL: Select when using SSL for LDAP communications.
It is recommended that you use SSL for secure transmission. Not
using SSL means that LDAP data will be transmitted over the net-
work in unsafe ASCII format.
– Search maximum number:
Specify the maximum number of items to show when searching.
– Timeout settings: Specify the transmission timeout for the LDAP
server. (1-120 sec)
– Authentication Settings (Anonymous, Simple, NTLM):
Select the bind type for the LDAP server. Select NTLM when con-
necting to an Active Directory.
– Domain name: Input the domain name.
Input Domain Name when connecting to an Active Directory.
– User Name:
This field can be entered when authentication is not set to Anony-
mous.
– Password:
This field can be entered when authentication is not set to Anony-
mous.
– Password (Confirmation): Re-input password for confirmation.