Konica Minolta bizhub 43 - Manual (Page 16)

- 14 -
bizhub 43
English
9 Replace the cover on the paper tray. Ensure that
the cover is properly closed.
10 Replace the paper tray in the machine and push it
in fully.
11 Define the paper format and type used in the ma-
chine.
> The machine automatically detects standard paper
formats. To check / define the format and type of pa-
per loaded, consult the section Paper settings.
Starting up the machine
Connecting the machine
1 Connect one end of the telephone cable to the ma-
chine socket and the other to the wall telephone
socket.
2 Connect one end of the LAN network cable (not
supplied) to the machine port and the other to your
local network port for the machine.
3 Ensure that the On/Off button is on Off (position 0).
4 Connect the mains cable to the machine. Connect
the mains cable to the wall socket.
5 Press the On/Off button to switch the machine on
(position I).
Initial configuration of the machine
In this section, you will find the initial settings to be
configured to be able to use your machine's basic
functions:
• geographic settings (country, language, communica-
tion network);
• date / time settings;
• fax settings (machine name and number);
• local network settings (automatic configuration of the
Ethernet network);
• paper settings.
WARNING
Before connecting the mains cable, you
must consult the Safety Instructions.
WARNING
The mains cable is used to disconnect the
machine from the power supply. As a pre-
caution, the mains power socket must be lo-
cated near the machine and easily
accessible in the event of danger.