Konica Minolta bizhub 43 - Manual (Page 11)

bizhub 43
- 9 -
English
• For environmental reasons, do not dispose of the machine or consumables at a household waste collection point.
The equipment can be disposed of at an authorized dealer's or a suitable collection site.
• Our products are designed to meet the highest requirements in terms of quality and functionality. We recommend
you only use consumables purchased from an authorized dealer.
Warning
This product complies with class A regarding radiated emissions (EN55022), and may create interference with other
information technology equipment or radio-TV or radiocommunications receivers placed in proximity, especially if it is
installed in a residential environment.
The installation instructions in this respect are important and must be adhered to.
If it is suspected that this installation is creating electromagnetic interference, switching it on / off may ensure that it is
indeed the source of the interference.
If the interference is created by the installation, preventive measures must be taken to reduce interactions, i.e.:
• move the affected equipment away as far as possible,
• redirect or change the position of the antenna of the affected radio or TV receiver,
• connect the affected equipment to a mains power outlet on a different circuit to that of the source.
Power supply
The plug must remain near the appliance and easily accessible.
For the Fax or the Telephone
• Never use this machine near a water source (for example beside a bath, sink or washtub), in a damp basement or
near a swimming pool.
• Avoid using the telephone (other than cordless) during an electrical storm. You may risk exposure to electric shock
due to lightening.
• Do not use a telephone near a gas leak to report the leak.
Handling and moving the machine
Shocks during handling
During printing, the paper tray, paper feeder, trap and other machine parts should not be subjected to any shocks.
Moving the machine
When moving the machine, it should be lifted, not dragged.
• Two people are required to move the machine. Keep the machine horizontal to prevent spilling toner.
• Never lift the machine using the metal scanner frame or you risk damaging it.
• To lift the machine, close the manual feeder and take hold of the machine as shown opposite.
• Even when an additional paper tray is installed, lift the machine as shown below. Do not take hold of the additional
paper tray handle, or the side cover, as you risk damaging the lower paper feeder.