Lenovo B5400 Notebook - Manual (Page 25)

Chapter 3. Recovery system
19
If you are unable to access the OneKey Recovery Pro workspace or the
Windows environment, do one of the following:
• Use a rescue medium to start the OneKey Recovery Pro workspace.
• Use recovery media if all other methods of recovery have failed and you
need to restore the hard disk drive to the factory default settings.
It is important to create a rescue medium and a set of recovery media as early
as possible and store them in a safe place for future use.
Note: If you are unable to access the OneKey Recovery Pro workspace or the Windows
environment from a rescue medium or recovery medium, you might not have the
rescue device (an internal hard disk drive, a disc, a USB hard disk drive, or other
external devices) set as the first boot device in the startup device sequence. You must
first make sure that your rescue device is set as the first boot device in the startup
device sequence in the BIOS program. Go to the Startup
Boot menu to temporarily
or permanently change the startup device sequence.
ĖĖ