American Dryer Corp. AD-25V - Manual (Page 39)

450342 - 4 www.amdry.com 39
Direct Spark Ignition Burner Assembly
For Models Mfd. prior to September 29, 2000
Illus. No. Part No. Qty. Description
1 141104 2 Small Tube Burner
2 151001 2 #8-32 Pal Nut
3 150108 2 #8-32 x 1/2” Pan Head Machine Screw
4* 140818 2 #31 Burner Orifice (natural gas)
140802 2 #50 Burner Orifice (liquid propane gas)
5 141230 1 1/2” Direct Spark Ignition Manifold (2-port)
6 318700 2 Pipe Bracket (bent)
7 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
8 128927 1 Natural Gas Valve
880960 1 1/2” Direct Spark Ignition Gas Valve with Liquid Propane Kit Combination
9 880134 1 Ignitor Probe Assembly
882537 1 Flame-Probe Wire
10 883849 1 Direct Spark Ignition Module with Three Tries
11 817027 1 Direct Spark Ignition Module Mounting Bracket Assembly
12 150309 3 #10-16 x 1/2” Hex Head TEK Crimptite Screw
13 152013 2 #6-32 Hex Nut
14 141313 1 90° x 1/2” x 1” Gas Shut Off Assembly
15 142800 1 1/2” x 18” Pipe
16 318712 1 Gas Valve Pipe Bracket
17 150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw
18 817058** 1 Direct Spark Ignition Burner Box – Natural Gas
(includes illus. nos. 1 through 3 and 5 through 18)
817059 1 Direct Spark Ignition Burner Box – Liquid Propane Gas
(includes illus. nos. 1 through 3 and 5 through 18)
817088 1 Direct Spark Ignition Burner Box ONLY
— 882267 1 AD-25V Liquid Propane Conversion Kit (includes orifices)
*** 882604 1 Steam to Gas Interface Assembly
* Consult factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.
***Needed when converting steam heat to gas heat.