Lenovo E49 Notebook - Manual (Page 60)

The battery cannot be charged.
You cannot charge the battery when it is too hot. If the battery feels hot, remove it from the computer and
allow it to cool to room temperature. After it cools, reinstall it and recharge the battery. If it still cannot
be charged, have it serviced.
An ac power adapter problem
Print these instructions now and keep them with your computer for reference later.
The ac power adapter is connected to the computer and the working electrical outlet, but the
power adapter (power plug) icon is not displayed on the taskbar. Also the ac power indicator does
not light up.
Do the following:
1. Make sure that the connection of the ac power adapter is correct. For instructions on connecting the ac
power adapter, see Safety, Warranty, and Setup Guide that comes with your computer.
2. If the connection of the ac power adapter is correct, turn off the computer, then disconnect the ac power
adapter and remove the main battery.
3. Reinstall the battery and reconnect the ac power adapter, then turn on the computer.
4. If the power adapter icon still is not displayed on the taskbar and the ac power indicator does not light
up, have the ac power adapter and your computer serviced.
A startup problem
Print these instructions now and keep them with your computer for reference later.
The Microsoft Windows operating system does not start.
On the Windows operating system, use the recovery program preinstalled on your computer to help solve or
identify your problem. For details, refer to the instructions in Chapter 6 “Recovery overview” on page 27.
Sleep and hibernation problems
Print these instructions now and keep them with your computer for reference later.
The critical low-battery error message appears, and the computer immediately turns off.
The battery power is getting low. Connect the ac power adapter to the computer, or replace the battery
with a charged one.
The computer enters sleep mode immediately after power-on self-test.
Make sure that:
• The battery is charged.
• The operating temperature is within the acceptable range. refer to Chapter 8 “Preventing problems”
on page 41.
Computer screen problems
Print these instructions now and keep them with your computer for reference later.
The screen is blank.
Do any of the following:
• If you are using the ac power adapter or using the battery, and the battery status indicator is on, press
Fn + up arrow to increase the screen brightness.
• If the power indicator is in blinking, press the power button to resume from the sleep mode.
46 User Guide