Using the setup utility, Starting the setup utility program, Chapter 5. using the setup utility – Lenovo D400 Desktop IdeaCentre User Manual

Page 26

Text mode
Original mode

The Setup Utility program is used to view and change the configuration settings
for your computer, regardless of which operating system you are using.
However, the operating-system settings might override any similar setting in the
Setup Utility program.

Starting the Setup Utility program

To start the Setup Utility program, do the following:

1. Power off the home center and all external devices.

2. Unplug all cables and power cord.

3. Place the system unit on a flat, stable surface.

4. Remove the cover. Refer to “Removing the cover”.

5. Connect the debug board cable to the debug board connector on the system board.

Using the Setup Utility