Lenovo C205 All-In-One - Manual (Page 42)

Hardware Maintenance Manual
40
Replacing the LED touch panel control module
To replace the LED touch panel control module
1. Remove the computer stand. Refer to “Removing the computer stand”.
2. Remove the computer cover. Refer to “Removing the computer cover”.
3. Remove the rear deco. Refer to “Removing the rear deco”.
4. Remove the 2 screws that secure the LED touch panel control module
to the chassis.
5. Disconnect the cables from the LED touch panel control module and
remove it.
6. Connect the cables to the new LED touch panel control module.
7. Align then screw in the new LED touch panel control module.
8. Install back the rear deco.
9. Reattach the computer cover and stand.