Lenovo ThinkServer RD330 - Manual (Page 100)

6. Locate the PCI Express card slot for installing the RAID card and then remove the PCI Express card slot
bracket from the riser card assembly 2. Store the PCI Express card slot bracket in the event that you
later remove the RAID card and need the bracket to cover the place.
Figure 42. Removing a PCI Express card slot bracket
7. Touch the static-protective package that contains the RAID card to any unpainted surface on the outside
of the server. Then, take the RAID card and the low-profile bracket out of the package.
Note: Carefully handle the RAID card by its edges.
8. Remove the two screws that secure the RAID card and then remove the full-height bracket from the
RAID card.
Figure 43. Removing the full-height bracket from the RAID card
88 ThinkServer RD330 User Guide