Lenovo IdeaCentre Q700 - Manual (Page 24)

User Guide
Note: The drive letter of the source file must be different from the target
drive letter.
Then click the copy icon.
Wait for the copying process to finish.
Note: Please do wait during the copying process. The time required for
this operation depends on the quantity and size of files you need to copy.
Do not power off the computer, otherwise system files might be corrupted.
2.3.3 Setting a Password
To ensure authentication of the user who is copying the files, the Lenovo file
management function enables you to set a protection password. Users
are unable to access the files in your hard disk drive partitions without passing
through the password authentication procedure. Follow the instructions below:
Single-click the key-shaped icon on the upper right side of the main interface to
configure the password.
The default password is blank.
Set a password when you access the File Backup for the first time. If you don’t
want to set a password, you may simply access the system directly and operate
accordingly.
2.3.4 Search
File management provides a search function, and backs up the searched files.
Input the file or file type to search for, and click the search icon at the bottom to
start searching the files.
Notes:
. During the process of copying files, do not power off the computer.
Otherwise, files on the hard disk drive may be damaged.
2. The disk partition identifier in the file management interface may fail to
correspond to that in the Windows system. Select operations based on
the directory content.
. The file copying function cannot be performed within the same partition.
If the source address and the target address of the same partition, the
Copy button is disabled.
31039306_Q700_UG_EN_V1.1.indd 19 2009.7.3 3:10:00 PM