Lenovo IdeaCentre Q700 - Manual (Page 21)

User Guide
Note about the service partition:
The files and relevant data used by the rescue system are saved in the service
partition. Deleting this partition will make the rescue system unusable. For more
detailed information, see the following instructions:
By selecting Control Panel → Management Tools → Computer Management
→ Disk Management, you can see the service partition, which must not be
deleted.
Note: The recovery files and relevant data used by the rescue system are
saved in the service partition. If the service partition is deleted or damaged
by someone other than authorized Lenovo service technicians, Lenovo
shall not in any way be liable for any losses arising therefrom.
2.1 Installing Drivers and Software Shipped with Your
Computer
The installation drivers and software functions in the rescue system provide a
way for the user to conveniently install the drivers and software shipped with the
computer. The rescue system can automatically install all its drivers and software
shipped with the computer, or it can selectively install some of the drivers and
software as required by the user.
Method 1: Automatic Installation
Turn on the computer. When the Lenovo logo appears, press the F2 key on the
keyboard to start the Rescue System, then select Install drivers and software.
Follow the screen prompts to install the drivers and software. Click Install to start
installing the drivers and software.
The system will restart. After the system has restarted, the installation process will
continue until completion.
Method 2: Manual Installation
From Windows, click Start → All Programs → Lenovo → Drivers and
Application Installation.
After starting the procedure, install all the drivers and software manually according
to the prompts.
31039306_Q700_UG_EN_V1.1.indd 16 2009.7.3 3:09:59 PM