Lenovo IdeaCentre Q700 - Manual (Page 12)

User Guide
1.4.5 If you have powered speakers with an adapter:
(This picture is only a sketch for guidance, it does not necessarily show actual
speakers)
a. Connect the cable that runs between the speakers, if necessary. On some
speakers, this cable is permanently attached.
b. Connect the adapter cable to the speaker, if necessary. On some speakers, this
cable is permanently attached.
c. Connect the speakers to audio line-out port on the computer.
d. Connect the adapter to the power source.
1.4.6 If you have powered speakers without an adapter:
(This picture is only a sketch print, it is not necessarily meant to be a true
representation of the speakers)
a. Connect the cable that runs between the speakers, if necessary. On some
speakers, this cable is permanently attached.
b. Connect the cable to the speaker, if necessary. On some speakers, this cable is
permanently attached.
c. Connect the speakers to the audio line-out port on the computer.
31039306_Q700_UG_EN_V1.1.indd 7 2009.7.3 3:09:51 PM