Asus A8V-E - Manual (Page 86)

4 - 2 0 4 - 2 0 4 - 2 0 4 - 2 0 4 - 2 0 C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
CAS# latency (Tcl) [Auto]
Controls the latency between the SDRAM read command and the time
the data actually becomes available. Configuration options: [Auto]
[2.0] [2.5] [3.0]
RAS# to CAS# delay (Trcd) [Auto]
Controls the latency between the DDR SDRAM active command and
the read/write command. Configuration options: [Auto] [2] [3] [4]
[5] [6] [7]
Min RAS# active time (Tras) [Auto]
Sets the minimum RAS# active time. Configuration options: [Auto] [5]
[6] [7] [8] [9] [10] [11] [12] [13] [14] [15]
Row precharge Time (Trp) [Auto]
Sets the Row precharge time. Configuration options: [Auto] [2] [3]
[4] [5] [6]
Master ECC Enable [Enabled]
Enables or disables the Master ECC feature.
Configuration options: [Disabled] [Enabled]
Upstream LDT Bus Width [16 bit] Upstream LDT Bus Width [16 bit] Upstream LDT Bus Width [16 bit] Upstream LDT Bus Width [16 bit] Upstream LDT Bus Width [16 bit]
Sets the upstream Lightning Data Transport (LDT) Bus Width.
Configuration options: [ 8 bit] [16 bit]
Downstream LDT Bus Width [16 bit] Downstream LDT Bus Width [16 bit] Downstream LDT Bus Width [16 bit] Downstream LDT Bus Width [16 bit] Downstream LDT Bus Width [16 bit]
Sets the downstream Lightning Data Transport (LDT) Bus Width.
Configuration options: [ 8 bit] [16 bit]
LDT Bus Frequency [Auto] LDT Bus Frequency [Auto] LDT Bus Frequency [Auto] LDT Bus Frequency [Auto] LDT Bus Frequency [Auto]
Sets the Lightning Data Transport (LDT) Bus frequency.
Configuration options: [Auto] [1 GHz] [800 MHz] [600 MHz] [400 MHz]
[200 MHz]
VLink Mode Selection [By Auto] VLink Mode Selection [By Auto] VLink Mode Selection [By Auto] VLink Mode Selection [By Auto] VLink Mode Selection [By Auto]
Sets the VLink mode. Configuration options: [By Auto] [Mode 0] [Mode 1]
[Mode 2] [Mode 3] [Mode 4]
PEG Data Scrambling [Auto] PEG Data Scrambling [Auto] PEG Data Scrambling [Auto] PEG Data Scrambling [Auto] PEG Data Scrambling [Auto]
Disables or enables the PCI Express™ graphics data scrambling.
Configuration options: [Auto] [Disable] [Enable]