Asus A8V-E - Manual (Page 101)

A S U S A 8 V - E D e l u x e A S U S A 8 V - E D e l u x e A S U S A 8 V - E D e l u x e A S U S A 8 V - E D e l u x e A S U S A 8 V - E D e l u x e 4 - 3 5 4 - 3 5 4 - 3 5 4 - 3 5 4 - 3 5
Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items Date (of Month) and Resume Time
(hh:mm:ss) become configurable with set values.
Configuration options: [Disabled] [Enabled]
Date (of Month) [0] Date (of Month) [0] Date (of Month) [0] Date (of Month) [0] Date (of Month) [0]
To set the date of alarm, highlight this item and press to display
the Day of Month Alarm pop-up menu. Key-in a value within the specified
range then press . Configuration options: [Min=0] [Max=31]
Resume Time (hh:mm:ss) 0 : 0 : 0 Resume Time (hh:mm:ss) 0 : 0 : 0 Resume Time (hh:mm:ss) 0 : 0 : 0 Resume Time (hh:mm:ss) 0 : 0 : 0 Resume Time (hh:mm:ss) 0 : 0 : 0
To set the time of alarm:
1. Highlight this item and press to display a pop-up menu for the
hour field.
2. Key-in a value (Min=0, Max=23), then press .
3. Press to move to the minutes field then press .
4. Key-in a minute value (Min=0, Max=59), then press .
5. Press to move to the seconds field then press .
6. Key-in a value (Min=0, Max=59), then press .
Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
PWR Button < 4 secs [Instant-Off] PWR Button < 4 secs [Instant-Off] PWR Button < 4 secs [Instant-Off] PWR Button < 4 secs [Instant-Off] PWR Button < 4 secs [Instant-Off]
Allows you to set the event after the power button is pressed for more
than 4 seconds. Configuration options: [Suspend] [Instant-Off]