Lenovo System Update Solution (Deployment Guide) - Manual (Page 28)

Table 10. User Settings\General (continued)
Configurable item Description Value Action
RepositoryLocation1 Use this setting
to indicate the
repository folder
path. The key
value name
should be
“Repository
Location%N%”,
where %N% is a
number between
(include) 1 and
20. Default value:
SUPPORTCENTER System Update will
search for update
packages in the
folder specified in
this value.
Possible values:
v SUPPORTCENTER
v A folder path
UNCMaxAttempts Use this setting
to indicate the
maximum
number that of
tries that System
Update will
attempt when
connecting to a
network share
folder before it
fails. Default value: 2 System Update will
attempt the number
of tries set in this
value when
connecting to a
network share folder.
Possible values: Any
valid integer
Example:
\GENERAL
\CheckLocalCRC = YES
\DebugEnable = NO
\DisplayInformationScreen = YES
\DisplayLicenseNotice = YES
\DisplayLicenseNoticeSU = YES
\ExtrasTab = NO
\IgnoreLocalLicense = NO
\IgnoreRMLicCRCSize = NO
\NotifyInterval = 300
\RepositoryLocation1 = SUPPORTCENTER
\UNCMaxAttempts = 2
User Settings\Scheduler
Using the scheduler function, you can configure System Update to search for
update packages at designated intervals. To improve download speeds of packages
from the Lenovo servers, change the RunOn setting to a day that fits the needs of
your enterprise. Do this when you install System Update.
The default values and settings for the System Update scheduler are provided in
the following table:
22 System Update Solution Deployment Guide