Kodak DX4330 - Manual (Page 85)

73
Chapter 10
Picture is not clear. The lens is dirty. Clean the lens ( page 92 ).
Subject too close when
taking picture. Move so there is at least 2.0
ft (0.6 m) between the
camera and the subject, or at
least 2.8 in. (7.0 cm) in
Close-up mode.
Subject or the camera
moved while the picture
was taken. Hold the camera steady
while taking the picture.
The subject is too far
away for the flash to be
effective. Move so there is no more
than 11.2 ft (3.4 m) between
the camera and the subject;
6.6 ft (2.0 m) in Telephoto.
Slide show does
not run on external
video device. Video Out setting is
incorrect. Adjust the camera Video Out
setting (NTSC or PAL,
page 52 ).
External device is set
incorrectly. Refer to the external device’s
user’s guide.
Camera
Problem Cause Solution