Liveview—using the lcd to frame your subject, Using the viewfinder – Kodak DX4330 User Manual
Page 30
18
Chapter 2
Liveview—Using the LCD to Frame Your
Subject
When you turn on Liveview, the LCD displays a live image of what the lens sees.
Use the LCD to frame your subject.
1
Turn the Mode dial to any Still position.
The LCD displays a mode description for a
few seconds. To interrupt the description,
press .
2
Press the OK button to turn on Liveview.
3
Frame your subject in the LCD.
4
Press the Shutter button half-way to set
the exposure and focus, then continue
pressing completely down to take the
picture.
5
To turn off Liveview, press the OK button.
NOTE: Liveview quickly depletes battery power.
To conserve battery power, turn off
Liveview and use the Viewfinder to frame
your subject.
To change the Liveview setting so that it is on whenever the camera is on, see
Using the Viewfinder
When using the viewfinder to capture close
subjects (3 feet or less), keep the subject
below the parallax marks. For even more
accurate framing results, turn on Liveview.
(Liveview depicts what the lens “sees.”)
EasyShare
MENU
DELETE
REVIEW
Share
OK
Mode dial
Parallax
marks
Auto
focus
zone