Kodak DC210 Plus - Manual (Page 25)

2-15
2
Capture
General Maintenance and Safety
✔ To keep from damaging your DC200/DC210, avoid exposing it to
moisture and extreme temperatures.
✔
Clean the outside of the DC200/DC210 by wiping with a clean, dry cloth.
Never use harsh or abrasive cleaners or organic solvents on the camera or
any of its parts.
✔
Never disassemble or touch the inside of the DC200/DC210. This could
result in electrical shock.
✔
If you notice smoke or a strange smell coming from the DC200/DC210,
immediately turn the camera off, wait a few minutes until the camera
cools, and then remove the batteries.
✔
Cleaning the lens and back LCD screen:
1 Blow gently on the lens or LCD screen to remove dust and dirt.
2 Moisten the lens or LCD screen by breathing lightly on it.
3 Wipe the lens or LCD screen gently with a soft, lint-free cloth or an
untreated lens-cleaning tissue.
☞
Do not use cleaning solutions unless they are designed
specifically for camera lenses. Do not wipe the camera lens or
LCD screen with chemically treated eyeglass lens tissue as it
may scratch the lens.
✔
Service agreements are available in some countries. Please contact your
Kodak dealer for more information.