Kodak DC210 Plus - Manual (Page 12)

2-2
Take a Picture
To take a picture:
Preview
You may also use the LCD as a live viewfinder while in Capture mode. This
allows you to preview your picture before it is taken.
☞
Using the Preview option significantly shortens battery life.
To activate Preview:
To exit: press the DO-IT button again to turn Preview off. The Preview setting
automatically turns off when the camera is turned off.
1 Set the Mode dial to Capture.
2 Turn the camera on.
3 Center subject in the viewfinder.
4 Press the SHUTTER button.
The green Ready light, Memory Card icon, Pictures Remaining number on
the Status Display blink rapidly, as the camera processes the picture.
☞
You do not need to hold the camera still while the green Ready light is
blinking, but you will not be able to take another picture until it stops.
1 Set the Mode dial to Capture.
2 Turn the camera on.
3 Press the DO-IT button.
The LCD displays the subject that is viewed
from the viewfinder with the icons of
activated camera features.
Template icon— Exposure Lock icon—appears
Exposure Compensation icon—
appears if the
template option
is activated. See if the exposure lock option
appears if the exposure
value is adjusted. See “
Exposure
is activated. See “ Exposure
“ Template ” on
page 4-4 for
details.
Lock ” on page 2-5 for details.
Compensation ” on page 2-4 for
details.