Asus Motherboard P5B-E - Manual (Page 88)

4-22 Chapter 4: BIOS setup
BIOS SETUP UTILITY
Advanced
4.4.4 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press to display the sub-menu.
Advanced Chipset Settings
WARMING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
North Bridge Chipset Configuration
Memory Remap Feature [Disabled]
Configure DRAM Timing by SPD [Enabled]
Static Read Control [Auto]
Initiate Graphic Adapter [PEG/PCI]
PEG Port Configuration
PEG Force x1 [Disabled]
North Bridge Chipset Configuration
ENABLED: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLED: Do not allow
remapping of memory
Configure Norrth Bridge
features.
Memory Remap Feature [Disabled]
Allows you to enable or disable the remapping of the overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-
bit operating system.Configuration options: [Disabled] [Enabled]
Configure DRAM Timing by SPD [Enabled]
Configuration options: [Enabled] [Disabled]
Static Read Control [Auto]
Configuration options: [Disable] [Auto] [Fast] [Faster]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot
device. Configuration options: [PCI/PEG] [PEG/PCI]
PEG Force x1 [Disabled]
Configuration options: [Enabled] [Disabled]