Asus Motherboard P5B-E - Manual (Page 53)

ASUS P5B-E 2-29
5. USB connectors (10-1 pin USB56, USB 78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
6. IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for a IEEE 1394a port. Connect the IEEE 1394a module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
P5B-E
®
P5B-E IEEE 1394a connector
IE1394_2
1
GND +12V TPB1- GND TP
A1-
+12V TPB1+ GND TP
A1+
P5B-E
®
P5B-E USB 2.0 connectors
USB78
USB+5V USB_P8- USB_P8+ GND NC
USB+5V USB_P7- USB_P7+
GND
1
USB56
1
USB+5V USB_P6- USB_P6+ GND NC
USB+5V USB_P5- USB_P5+
GND
USB910
NC
GND
USB_P10+ USB_P10-
USB+5V
GND USB_P9+ USB_P9- USB+5V
1
Connect the USB cable to ASUS Q-Connector (USB, blue) first, and then install
the Q-Connector (USB) to the USB56 connector onboard.
The IEEE1394a module is purchased separately.