Philips Multimedia projector bCool XG1 - Manual (Page 6)

>
To activate and deactivate the menu.
To confirm actions in the menu when the menu is on screen.
When the menu is active the Cursor Control controls the menu cursor to navigate through the
OSD menu.The cursor control works with up/down and left/right button operation.
To automatically adjust frequency, tracking, horizontal and vertical position. With most signal
sources, Auto Image provides the best results
To switch the projector in or out of the Power/Standby mode.
The Standby indicator (text on button/ring around button):
In Power on mode:
–
blinks green when the projector is warming up;
– lights up green when the projector is in Power On mode;
In Power off mode:
–
lights up red when the projector is in Standby mode;
– blinks red when the projector is cooling down.
Lights up red in case of temperature error.
– Fast blinks red (0.5 sec On, 0.5 sec Off) when lamp start has failed.
– Fast blinks red (1 sec On, 1 sec Off) in case of fan error.
To select the current projection source (Auto, Computer, DVI,YPbPr,YCbCr, RGBS, S-Video or
Video).The button toggles between the seven signals.
To adjust the size of the projected image.
To adjust the focus of the projected image.
Menu 1
OK 2
Cursor Control 3
Auto Image 4
Standby/
Standby indicator 5
Temperature indicator 6
Lamp indicator 7
Source 8
Zoomring 9
Focus ring 0
Philips Multimedia Projector
6 English User guide bCool XG1
2. Functional overview
9
0
6
Temp.
OK Menu
Source Auto Image
Lamp Temp.
OK Menu
Source Auto Image
Lamp
1 2
3
4 8
5
7
# @
$
!
%
^
Controls