Vollrath F122 - Manual (Page 22)

16
4.4 TROUBLESHOOTING - AUTOFILL PUMP
PROBLEM POSSIBLE CAUSE REMEDY
Pump does not
operate.
1 Low water pressure. 1 Verify that there is adequate water pressure at
the inlet fi tting (30-50 psi).
2 Restriction or plugged auto fi ll system. 2 Flush and sanitize the pump and tubing.
3 Empty BIB 3 Replace BIB
Syrup
concentration
incorrect
1 BIB connector is not connected to the
BIB properly. 1 Check connection and reconnect if necessary.
2 Leak at the connections or in the
tubing. 2 Look for leaks at the connections and bubbles
in the tubing. Tighten clamps and replace
tubing if necessary.
3 Air in the BIB syrup container. 3 Remove the air from the BIB syrup container.
4 Pump is clogged with debris or
particulates. 4 Remove syrup valves and inspect for debris
or improper closing that would interfere with
operation.