Vollrath Signature Server Milk Station - Manual (Page 6)

www.vollrath.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.
Main Tel: 800.628.0830
Fax: 800.752.5620
Technical Services: 800.628.0832
Service Fax: 920.459.5462
Canada Service: 800.695.8560
© 2014 The Vollrath Company, L.L.C.
Item No. 2350100-1 en Rev 08/14
Set Preheat in Auto Mode:
1. Push (14) SET/HEAT/DISPLAY switch. “A” will appear in the left half of
display window (7).
2. Push (13) PREHEAT. “P” will appear in the right half of display (7)
3. Repeat procedures to remove from preheat mode.
Check Auto Mode Heat Settings:
1. Push (14) SET/HEAT/DISPLAY switch. . “A” will appear in the left half of
display window (7).
2. A green light (3) will come on above each well that has been preset.
3. Push (4) below each well to view programmed setting.
4. If PREHEAT has been selected, the HEAT DISPLAY SETTING (6) will light
#9 and programmed setting.
5. Push (14) and unit will return to AUTO mode
Program Auto Start Time:
NOTE: Clock function must be set to use this feature.
1. Push (11) AUTO SET button to clear display (7). 00:00 will appear in the
display window.
2. Push (8) to set desired hour.
3. Push (9) to set minute. The display will advance in 5-minute increments.
4. Push (10) AUTO START button. The time of day will appear in the display
window. The green start time indicator light will flash to indicate start time
has been programmed. The light will turn off when start time has been
reached.
Program Auto Stop Time:
NOTE: Clock function must be set to use this feature.
1. Push (12) AUTO STOP button to clear display (7). 00:00 will appear in the
display window.
2. Push (8) to set desired hour.
3. Push (9) to set minute. The display will advance in 5-minute increments.
4. Push (10) AUTO START button. The time of day will appear in the display
window. The green stop time indicator light will flash to indicate start time
has been programmed.
The MASTER START/STOP light will come on when stop time has been
reached and the wells have turned off.
Check Auto Start/Stop Time:
1. Push (15) to see start time in display.
2. Push (16) to see stop time in display
Cancel Auto Start/Stop Time:
1. Push (11) auto set button to clear display.
2. Push (12) auto stop button to clear display.
Repeat Auto Start/Stop Times:
After unit has cycled off from the AUTO MODE, push (10) to repeat times and
heat settings. Green start and stop time indicator lights will flash
S
erVice and
r
ePair
There are no user serviceable parts within this appliance. To avoid serious injury or damage, never attempt to repair the equipment or replace a damaged power cord
yourself. Do not send equipment directly to The Vollrath Company, LLC. Please contact Vollrath Technical Service from the list below.
VOLLRATH Technical Service • 1-800-628-0832 • Email: [email protected]
When contacting Vollrath Technical Service please be ready with the item number, model number (if applicable), serial number, and proof of purchase showing the
date the unit was purchased.
W
arranty
S
tatement for
t
he
V
ollrath
c
o
. l.l.c.
This warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company LLC does not offer a written warranty to
purchasers for such uses.
The Vollrath Company LLC warrants each of its products listed below against defects in materials and workmanship for the applicable period provided below. All
other products manufactured or distributed by The Vollrath Company LLC are warranted against defects in materials and workmanship for a period of one year. In
all cases, the warranty runs from the date of the end user’s original purchase found on the receipt. Any damages from improper use, abuse, modification or damage
resulting from improper packaging during return shipment for warranty repair will not be covered under warranty.
„ Refrigeration compressors – The warranty period is 5 years.
„ For refrigeration compressors and the second year of the warranty on Cayenne® Heat Strips and mixers, The Vollrath Company LLC will provide the part only;
and the buyer will be responsible for all labor charges incurred in performing the repair or replacement.
„ Replacement parts – The warranty period is 90 days.
„ Warranty does not cover: Glass, Breath Guard Glass
For complete warranty information, product registration and new product announcement, visit www.vollrath.com.