Sheffer A SERIES - Manual (Page 14)

TIE ROD AND BASIC DOUBLE ROD
Mountings
*Number in parenthesis ( ) is ANSI Standard No. B93.1-64 Mounting Style Designation.
A-13
Mounting Information
Tie Rod Mount Cylinders are compact
space savers for the customer whose
overall cylinder envelope dimensions
must be held to a minimum. Longer or
shorter tie rod extensions are available.
Head Mount
Front Head Mount Cylinders have
accurately machined pilot diameters (B
in table, page A-17) for aligning
cylinders to the work. On installations
where the pilot diameter cannot be
used for aligning cylinder to work, or
for rear head mount cylinders, we
recommend drilling and dowel pinning
heads (
3 / 4 " maximum drill depth in
head) after cylinder is tightened in
place to prevent shifting.
Head Mount Cylinders should be
solidly mounted to a rigid section of
the machine with high tensile bolts
(socket head types recommended).
Double Rod Extension
Double Piston Rod Extension is
available in any mounting style except
Clevis. Basic dimensions shown here
apply to all mounting styles.
For Double Rod Cylinder Mounting
dimensions not shown in chart, refer to
pages 3, 4, 7, 8, 11, 12, 13, 14 showing
specific mounting style to be used.