Mob (man over board), Tracks – Seiwa Explorer 3(v.7.0) User Manual

Page 4

The Active Route

The Active Route is the working Route: it can be edited by adding, removing or moving
Waypoints. To change the Active Route, press MENU (3) button, then make this sequence:

select “Route”, press ENTER button (8), select the desired Route, press ENTER button (8)

Follow an Active Route

To follow an Active Route, move the cursor on a Route's first Waypoint, then make this
sequence:

press ENTER button (8), select “GOTO”, press the ENTER button (8)

MOB (Man Over Board)

Plot a MOB

To plot a MOB, simply press the MOB (2) button any time needed.
ATTENTION: You can plot one MOB only, at the time.

To cancel the MOB

make this sequence:

press MOB button (2) and press the Softkey “Confirm”

Tracks

Edit Track Preferences

To edit Track preferences (such as Step Units)

make this sequence:

press MENU button (3), select “Track”, press ENTER button (8), select “Config”, press
ENTER button (8), select which value change, press ENTER button (8)

Select Active Track

Explorer 3 can store 10.000 track points and 5 total tracks. It's possible to use the whole
10.000 track points in one track, but a different Active Track can be selected.
To select the Active Track,

make this sequence:

press MENU button (3), select “Track”, press ENTER button (8), select “Config”, press
ENTER button (8), select “Active Track”, select Track number, press ENTER button (8)

To start registering a Track using the selected choices,

make this sequence:

press MENU button (3), select “Track”, press ENTER button (8),
select “Activate”, press ENTER button (8)

Delete Track Points from an active Track

To delete Track Points from the active Track,

make this sequence:

press MENU button (3), select “Track”, press ENTER button (8), select “Delete”, press
ENTER button (8), select one of the 3 Softkeys “Begin” “End” “Whole”
(selecting the Softkey “Whole” the System will ask you a confirmation)