beautypg.com

Revolabs Single Channel System — Sony PCS-1 User Manual

Revolabs Equipment

background image

Revolabs Single Channel System — Sony PCS-1 Setup Guide

This setup guide will guide you through the steps needed to properly connect a

Revolabs Single Channel System to a Sony PCS-1 video codec.

Note:

It is important to carefully follow these instructions in order and completely.

Otherwise your Single Channel System and/or the video codec may not function

properly. Please read through these instructions completely before proceeding.

Contact Revolabs technical support if you have any questions.


Requirements for connecting systems:

1. Revolabs Single Channel hone System
2. Sony PCS-1 video codec

3. QTY 1 07-STEMIC-PPP Line-to-Mic Adapter Cable*

4. QTY 1 Female XLR—1/8” mono male cable* (i.e. Calrad 10-144)

* Optional Items