Revolabs Solo Single-Channel System – Polycom SoundStation2 Avaya 2490 - Manual

Revolabs Solo™ Single-Channel System – Polycom ® SoundStation2 Avaya
2490 Setup Guide
N OTES AND C AUTIONS :
This setup guide will guide you through the steps needed to properly connect a
Revolabs Solo Single-Channel System to a Polycom SoundStation2 Avaya 2490
speakerphone.
1. Connecting the Cables
2. Configuring the SoundStation2 Avaya 2490 speakerphone
Note: It is important to carefully follow these instructions in order and completely. Otherwise,
your Single-Channel System and/or the phone may not function properly. Please read through
these instructions completely before proceeding. Contact Revolabs Technical Support if you
have any questions.
IMPORTANT: This will only work with the SoundStation2 Avaya 2490 with LCD screen
(expandable version – P/N 2305-16375-001). SoundStation2 models without LCD screen or the
expandable capability do not have the ability to activate an external wireless microphone.
Requirements for connecting systems:
1. Revolabs Single-Channel system
2. Polycom SoundStation2 Avaya 2490 speakerphone with LCD screen
3. Qty 1 Revolabs 2.5mm to RCA breakout cable (provided with single-
channel system)