Revolabs Solo Personal Microphone Charger User Manual
Solo personal

Solo Personal
Solo Personal
Solo Personal
Solo Personal Microphone Charger
Microphone Charger
Microphone Charger
Microphone Charger
Users Guide
Users Guide
Users Guide
Users Guide
Congratulations on your purchase of the Solo Personal Microphone Charger. This unit is designed to
charge the 5 volt battery in all Revolabs Solo
™
Executive microphones (01-EXEMIC, 03-EXEMICEU,
05-TBLMIC, 05-TBLMICEU, 06-XLRMIC and 06-XLRMICEU). This is particularly useful in applications
where a particular microphone needs to be at a fixed location even while charging, such is in a
boardroom, where microphone audio has been adjusted for specific meeting participants.
The charger power adapter can be connected to any standard 100-240V AC outlet. Note: power
adapter plug-type varies by country.
To use the Solo Personal Microphone Charger:
Step One:
Plug the AC adapter into an AC outlet.
Step Two:
Attach the AC Adapter cable to the connector in Personal Microphone Charger Base.
Step Three:
Insert the Microphone into the Charger Base. The microphone will perform a short self-test (flashing
LEDs) and then begin charging. The microphone does not transmit audio while charging. Note: The
battery will NOT overcharge if left in the Charger.
Warranty
Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective
part or unit (at the discretion of the Seller) will be free of charge for a period of 1 year after purchase.
System Specifications
Dimensions, (L, W, H):
3.9” (10 cm) x 2.4” (6 cm) x 1.0” (2.56 cm), 0.5 lb (0.23kg)
Environmental Requirements:
Temperature: 40° to 105° F (5° to 40° C)
Operating Humidity: 20% to 85%
Shipping Weight: 1.5 lbs (0.68 kg)
Power Requirements
Input: 100-240VAC, 50-60Hz, 300mA
Output: 5 VDC, Regulated (proprietary 4 pin connector)
Battery Type: Lithium Polymer
Models: 02-DSKSYS-C, 04-DSKSYSEU-C
Version 1.4