Revolabs Solo Executive Tabletop Microphone - Manual

You are now ready to experience wireless, rechargeable and
secure (encrypted) collaborative freedom.
The TableTop microphone should be centered on
the table in front of users, between 2 to 5 feet (.75
to 1.75m) away. It is always better to put the
microphone as close as possible to the person
speaking, but avoid placing the microphone where
it might be blocked by laptops or paperwork.
Step
#
2
2 to 5 feet (.75 to 1.75m)
Q
S
G
-T
T
M
-v
1.
0-
20
07
Remove the microphone from the Charger Base.
The microphones turn on and mute themselves
automatically when removed from Charger Base
(flashing RED LED) to prevent handling noise while
placing the microphone on the table.
Step
#
1
To turn microphones off, first mute the microphone,
and then plug it into the Charger Base. Make sure the
RED LED turns on. Optionally, the microphone can
be turned off manually. Simply press and hold the
MUTE button for ~10 seconds until the LED turns
solid RED and release button.
Step # 4
With the microphone in position, un-mute the
microphone by pressing and releasing the MUTE
button (confirm by viewing flashing GREEN LED).
Step
#
3
Flashing red = muted
Flashing green = un-muted
Mute/un-mute toggle button
Revolabs Quick Start Guide
Using a Solo TableTop Wireless Microphone
Revolabs Inc • 63 Great Road, Maynard, MA 01754 • 1-800-326-1088 • www.revolabs.com • [email protected]